Pumps are specialised centrifugal pumps for all market segments:
Typical applications and uses:
- Wastewater
- Marine, swimming pools and fish farms
- Sewage and effluent
- Sludge / mixed suspended solids
- Flood control
- Agriculture
- Sanitary & food
- HVAC and fresh water
Type S-WP.
Engineered to incorporate many user friendly features.
Flowrates ranging from 68 to 3500 m3/hour.
Highly efficient motors.
Type S-WN.
Engineered to incorporate many user friendly features.
Designed for horizontal or vertical mounting.
Flowrates ranging from 68 to 3500 m3/hour.
Waste Water Pumps type S-WP and S-WN
Although initially designed for wastewater, this type of pump can be used for many other applications by adjusting the motor size and impeller type.
Type S-IP and S-MP.
High efficiency in-line pumps.
DN40 to DN250 connection sizes.
Flowrates up to 650 m3/hour.
Best pump choice for moving low viscosity liquids.
Type S-DP.
Ideal for the draining of, or emptying of flooded areas, tanks, construction sites, buildings, pits and pools.
Ideal for pumping water mixed with light abrasive particles and for irrigation duties.
Plain tail connections to fit to hose pipes.
Can operate upright, upside down or horizontal.
Type S-WS.
Ideal for the draining sludge pits and slurry ponds that require a heavy duty & powerful pump.
Ideal for pumping water mixed with solids.
Plain tail connections to fit to hose pipes.
Can operate upright, upside down or horizontal.
Type S-FP.
All stainless steel, hygienic application pump.
Ideal for pumping food, dairy, drink, pharmaceutical and cosmetic products.
EHEDG Certification with a surface roughness <1Ra.
Up to 100 m3/hour flowrates & 140 Deg C. temperature.
Why consider a Sonflow pump
Sonflow pumps are:
- A quality engineered product to give a long service life
- A range of pumps specially designed with low and ease of maintenance in mind
- A range of pump where the parts can be replaced without the need to use special tools or to employ specialist engineers.
- A modular design which allows modification of the performance without fuss and without having to replace the complete unit.
- Supplied on quick deliveries
- Competitive priced for an outstanding pump
Features and Advantages of Sonflow Waste Water Pumps that sets the range top in the class
1) Over-sized Shafts
- Each pump has its own oversized shaft – oversized to ensure a smooth-running pump without vibrations even at maximum power. This ensures many hours of reliable service for all of the components and guarantees a controlled temperature within the insides of the pump.
- A lower temperature inside the pump protects the shaft and the motor windings.
2) High quality / efficiency motors
- Siemens motors used on many pumps – quality components to give a long service life.
- All motors IE3 with class F insulation.
- Thermal overload protection switches included as standard
- Moisture sensor switch included as standard
3) Fast lock latch bolts to attach motor housing to pump enclosure
- Allows easy and quick separation of the pump and motor without the need for special tools.
- Reduced maintenance downtime.
- The pumps are also equipped with an oil drain tap thus allowing for a speedier and easier oil change.
4) Maintained efficiency due to adjustable Wear Ring
- An axially adjustable wear ring is fitted to optimise the pump efficiency when the pump starts to be affected by wear.
- Adjustment of the ring reduces the hydraulic loss throughout the service life of the pump.
5) Impellers selected to optimise efficiency from the start
- Channel, vortex and B-tween impellers available in cast iron or stainless steel.
6) Unique cartridge seals for easier maintenance
- Double mechanical seals are installed in a user-friendly cartridge – possible to change without using any special tools and eliminates the risk of improper installation.
7) Dry pit and portable pumps supplied with cooling jacket as standard
- Sealed, internal cooling jacket, driven by its own impellor – circulates cooling liquid through passages around the motor to absorb the heat from the motor. Heat is then transferred across to the media being passed through the main pump housing. The cooling fluid and the pumped media do not mix.
- Efficient cooling is a great benefit to the motor, bearings and seals, contributing to a long service life.
8) Modular design and fewer spare parts
- Interchangeable parts results in a greater flexibility to customise the pumps to best suit the application.
- Fewer spares parts required.
** NOTE – not all of the above features are included on the smallest model S-WP0
